Datasheet

www.moxa.com
2
Magnetic Isolation Protection 1.5 kV (built-in)
Optical Fiber
100BaseFX
Multi-Mode Single-Mode
Fiber Cable Type OM1
50/125 µm
G.652
800 MHz x km
Typical Distance 4 km 5 km 40 km
Wavelength
Typical (nm) 1300 1310
TX Range (nm) 1260 to 1360 1280 to 1340
RX Range (nm) 1100 to 1600 1100 to 1600
Optical Power
TX Range (dBm) -10 to -20 0 to -5
RX Range (dBm) -3 to -32 -3 to -34
Link Budget (dB) 12 29
Dispersion Penalty (dB) 3 1
Note: When connecting a single-mode fiber transceiver, we recommend using an
attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link
budget (dB) > dispersion penalty (dB) + total link loss (dB).
Power Parameters
Input Current 271 mA @ 12 to 48 VDC
Input Voltage 12 to 48 VDC
Overload Current Protection Supported
Power Consumption 271 mA @ 12 to 48 VDC
Physical Characteristics
Housing Plastic
IP Rating IP30
Dimensions 25 x 109 x 97 mm (0.98 x 4.29 x 3.82 in)
Weight 125 g (0.27 lb)
Installation DIN-rail mounting
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature (package included) -40 to 70°C (-40 to 158°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV