Installation guide

- 12 -
LED Indicators
The front panel of Moxa Industrial Media Converter contains several LED
indicators. The function of each LED is described in the table below.
LED Color State Description
PWR1 AMBER
On
Power is being supplied to power
input PWR1
Off
Power is not being supplied to
power input PWR1
PWR2 AMBER
On
Power is being supplied to power
input PWR2
Off
Power is not being supplied to
power input PWR2
FAULT
RED
On
When the corresponding PORT
alarm is enabled, and the port’s
link is inactive.
Off
When the corresponding PORT
alarm is enabled and the port’s link
is active, or when the
corresponding PORT alarm is
disabled.
10M
GREEN
On
TP port’s 10 Mbps link is active
Blinking
Data is being transmitted at 10
Mbps
Off
TP Port’s 10 Mbps link is inactive
100M
(TP)
GREEN
On
TP port’s 100 Mbps link is active
Blinking
Data is being transmitted at 100
Mbps
Off
100BaseTX Port’s link is inactive
100M
(FX)
GREEN
On FX port’s 100 Mbps is active
Blinking
Data is being transmitted at 100
Mbps
Off 100BaseFX port is inactive
FDX/
COL
GREEN
On
100BaseFX port is being
transmitted at full duplex
Blinking Collision occurs
Off
100BaseFX port is being
transmitted at half duplex