User`s manual

IKS-6726 Featured Functions
3-59
NOTE Warning e-mail messages will have sender given in the form:
Managed-Redundant-Switch-00000@Switch_Location
where Managed-Redundant-Switch-00000 is the default Switch Name, 00000 is IKS-6726’s serial number,
and Switch_Location is the default Server Location.
Refer to the Basic Settings section to see how to modify Switch Name and Switch Location.
Email Setup
Mail Server IP/Name
Setting Description Factory Default
IP address The IP Address of your email server. None
Account Name
Setting Description Factory Default
Max. 45 Charters Your email account. None
Password Setting
Setting Description Factory Default
Disable/Enable to
change password
To reset the password from the Web Browser interface, click
the Change password check-box, type the Old password, type
the New password, retype the New password, and then click
Activate; Max. 45 characters.
Disable
Old password Type the current password when changing the password None
New password Type new password when enabled to change password; Max.
45 characters.
None
Retype password If you type a new password in the Password field, you will be
required to retype the password in the Retype new password
field before updating the new password.
None
Email Address
Setting Description Factory Default
Max. 30 characters You can set up to 4 email addresses to receive alarm emails
from IKS-6726.
None
Send Test Email
After finishing with the email settings, you should first click Activate to activate those settings, and then press
the Send Test Email button to verify that the settings are correct.