User`s manual

IKS-6726 Featured Functions
3-24
Coupling Control Port
Setting Description Factory Default
Coupling Control Port This specifies which port on the IKS-6726 will
be used as the coupling control port.
Port 1-4
(without Gigabit Ethernet module)
Port 1-2
(with Gigabit Ethernet module)
Configuring Turbo Ring V2
NOTE When using a dual-ring architecture, users must complete configuration for both Ring 1 and Ring 2. The status
of both rings will appear under Current Status.
“Current Status” Items
Now Active
This shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.
Ring 1/2—Status
This shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is active.
Ring 1/2—Master/Slave
This indicates whether or not the IKS-6726 is the master of the Turbo Ring. This field appears only when
selected to operate in Turbo Ring or Turbo Ring V2 mode.