User`s manual

IKS-6726 Featured Functions
3-8
NOTE The IKS-6726 does not have a real time clock. The user must update the Current Time and Current Date to
set the initial time for IKS-6726 after each reboot, especially when there is no NTP server on the LAN or
Internet connection.
Current Time
Setting Description Factory Default
User-specified time This allows configuration of the local time in local 24-hour
format.
None
Current Date
Setting Description Factory Default
User-specified date This allows configuration of the local date in yyyy-mm-dd
format.
None
Daylight Saving Time
The Daylight Saving Time settings are used to automatically offset the IKS-6726’s time forward according to
national standards.
Start Date
Setting Description Factory Default
User-specified date This specifies the date that Daylight Savings Time begins. None
End Date
Setting Description Factory Default
User-specified date This specifies the date that Daylight Savings Time ends. None
Offset
Setting Description Factory Default
User-specified hour This specifies the number of hours that the time should be
offset forward during Daylight Savings Time.
None
System Up Time
This indicates how long the IKS-6726 remained up since the last cold start. The up time is indicated in seconds.
Time Zone
Setting Description Factory Default
Time zone This specifies the time zone, which is used to determine the
local time offset from GMT (Greenwich Mean Time).
GMT (Greenwich
Mean Time)
NOTE Changing the time zone will automatically correct the current time. Make sure to set the time zone before
setting the time.
Time Server IP/Name
Setting Description Factory Default
IP address or name of
time server
This is the IP or domain address (e.g., 192.168.1.1,
time.stdtime.gov.tw, or time.nist.gov).
IP address or name of
secondary time server
The IKS-6726 will try to locate the secondary NTP server if the
first NTP server fails to connect.
None
Time Server Query Period
Setting Description Factory Default
Query period This parameter determines how frequently the time is updated
from the NTP server.
600 seconds