User`s manual

IKS-6726 Featured Functions
3-3
ATTENTION
By default, no password is assigned to the IKS-6726’s web, Telnet, and serial consoles. If a password is
assigned, you will be required to enter the password when you open the serial console, Telnet console, or Web
console.
Account
Setting Description Factory Default
Admin This account can modify the IKS-6726’s configuration.
User This account can only view the IKS-6726’s configurations.
admin
Password
Setting Description Factory Default
Old password
(max. 16 characters)
Enter the current password None
New password
(Max. 16 characters)
Enter the desired new password. Leave it blank if you want to
remove the password.
None
Retype password (Max.
16 characters)
Enter the desired new password again. Leave it blank if you
want to remove the password.
None
Accessible IP
The IKS-6726 uses an IP address-based filtering method to control access.
You may add or remove IP addresses to limit access to the IKS-6726. When the accessible IP list is enabled,
only addresses on the list will be allowed access to the IKS-6726. Each IP address and netmask entry can be
tailored for different situations: