User`s manual

IKS-6726 Gettying Started

2-7

NOTE When connecting to the IKS-6726’s Telnet or web console, first connect one of IKS-6726’s Ethernet ports to

your Ethernet LAN or directly to your PC’s Ethernet port. You may use either a straight-through or cross-ove

Ethernet cable.

NOTE The IKS-6726’s default IP address is 192.168.127.253.

After making sure that the IKS-6726 is connected to the same LAN and logical subnet as your PC, open the

IKS-6726’s web console as follows:

1. Point your web browser to the IKS-6726’s IP address by entering it in the Address or URL field.

2. The IKS-6726’s web console will open, and you will be prompted to log in. Select the login account (admin

or user) and enter the Password. This password will be required to access any of the consoles (web, serial,

Telnet). If you do not wish to create a password, leave the Password field blank and press Enter.

NOTE By default, no password is assigned to the IKS-6726’s web, serial, and Telnet consoles.

3. After logging in, you may need to wait a few moments for the web console to appear. Use the folders in the

left navigation panel to navigate between different pages of configuration options.