User`s manual

IKS-6726 Gettying Started
2-4
6. The serial console will prompt you to log in. Press Enter and select admin or user. Use the down arrow key
on your keyboard to select the Password field and enter a password if desired. This password will be
required to access any of the consoles (web, serial, Telnet). If you do not wish to create a password, leave
the Password field blank and press Enter.
7. The Main Menu of the IKS-6726’s serial console should appear. (In PComm Terminal Emulator, you can
adjust the font by selecting Font… in the Edit menu.)
8. Use the following keys on your keyboard to navigate the IKS-6726’s serial console:
Key Function
Up, down, right, left arrow keys
Tab
Move the onscreen cursor
Enter Display and select options
Space Toggle options
Esc Previous menu
Configuration by Telnet Console
You may open the IKS-6726’s Telnet or web console over a network. This requires that the PC host and
IKS-6726 are on the same logical subnet. You may need to adjust your PC host’s IP address and subnet mask.
By default, the IKS-6726’s IP address is 192.168.127.253 and IKS-6726’s subnet mask is 255.255.255.0 (for
a Class B network). This means that your PC’s IP address must be set to 192.168.xxx.xxx for a subnet mask of
255.255.0.0, or to 192.168.127.xxx with a subnet mask of 255.255.255.0.