User`s manual

IKS-6726 Featured Functions
3-70
NOTE The following events will be record into IKS-6726’s Event Log Table.
• Cold start
• Warm start
• Configuration change activated
• Power 1/2 transition (Off ( On), Power 1/2 transition (On ( Off)
• Authentication fail
• Topology changed
• Master setting is mismatched
• Port traffic overload
• dot1x Auth Fail
• Port link off / on
Using Syslog
This function provides the event logs for the syslog server. The function supports 3 configurable syslog servers
and syslog server UDP port numbers. When an event occurs, the event will be sent as a syslog UDP packet to
the specified syslog servers.
Syslog Server 1
Setting Description Factory Default
IP Address Enter the IP address of 1st Syslog server used by your network. None
Port Destination
(1 to 65535)
Enter the UDP port of 1st Syslog server. 514
Syslog Server 2
Setting Description Factory Default
IP Address Enter the IP address of 2nd Syslog server used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of 2nd Syslog server. 514
Syslog Server 3
Setting Description Factory Default
IP Address Enter the IP address of 3rd Syslog server used by your network. None
Port Destination
(1 to 65535)
Enter the UDP port of 3rd Syslog server. 514