User`s manual

IKS-6726 Featured Functions
3-68
Multi-cast packets (in green color), and Broad-cast packets (in blue color). The graph is updated every few
seconds, allowing the user to analyze data transmission activity in real-time.
Monitor by Port
Access the Monitor by Port function by selecting ALL 10/100M or 1G Ports or Port i, in which i = 1, 2, …, G2,
from the left pull-down list. The Port i options are identical to the Monitor by System function discussed above,
in that users can view graphs that show All Packets, TX Packets, RX Packets, or Error Packets activity, but in
this case, only for an individual port.
The All Ports option is essentially a graphical display of the individual port
activity that can be viewed with the Console Monitor function discussed above. The All Ports option shows three
vertical bars for each port. The height of the bar represents Packets/s for the type of packet, at the instant the
bar is being viewed. That is, as time progresses, the height of the bar moves up or down so that the user can
view the change in the rate of packet transmission. The blue colored bar shows Uni-cast packets, the red
colored bar shows Multi-cast packets, and the orange colored bar shows Broad-cast packets. The graph is
updated every few seconds, allowing the user to analyze data transmission activity in real-time.