User`s manual

IKS-6726 Featured Functions
3-65
Type
Setting Description Factory Default
IP Use switch IP address as the remote ID sub IP
MAC Use switch MAC address as the remote ID sub IP
Client-ID Use the combination of switch MAC address and IP address as
the remote ID sub
IP
Other Use the user-designated ID sub IP
Value
Setting Description Factory Default
Displays the value that was set
Max. 12 characters Complete this field if type is set to Other Switch IP address
Display
Setting Description Factory Default
The actual hexdecimal value configured in the DHCP server for
the Remote-ID. This value is automatically generated
according to the Value field. Users cannot modify it.
COA87FFD
DHCP Function Table
Enable
Setting Description Factory Default
Enable or Disable Enable or disable DHCP Option 82 function for this port. Disable
Using Diagnosis
The IKS-6726 provides two important tools for administrators to diagnose network systems.
Mirror Port
The Mirror port function can be used to monitor data being transmitted through a specific port. This is done
by setting up another port (the mirror port) to receive the same data being transmitted from, or both to and
from, the port under observation. This allows the network administrator to sniff the observed port and thus
keep tabs on network activity.
Take the following steps to set up the Mirror Port function:
STEP 1
Configure IKS-6726’s Mirror Port function from either the Console utility or Web Browser interface. You will
need to configure three settings: