User`s manual

IKS-6726 Featured Functions
3-60
NOTE Auto warning e-mail messages will be sent through an authentication protected SMTP server that supports
the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and Security Layer)
authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning e-mail
messages can be delivered without using an authentication mechanism.
Configuring Relay Warning
The Auto Relay Warning function uses relay output to alert the user when certain user-configured events take
place. There are two basic steps required to set up the Relay Warning function:
Configuring Relay Event Types
Select the desired Event types from the Console or Web Browser Event type page (a description of each event
type is given later in the Relay Alarm Events setting subsection).
Activate your settings
After completing the configuration procedure, you will need to activate your IKS-6726’s Relay Event Types.
Event Setup
Event Types can be divided into two basic groups: System Events and Port Events. System Events are
related to the overall function of the switch, whereas Port Events are related to the activity of a specific port.
The IKS-6726 supports two relay outputs. You can configure which relay output is related to which events. This
helps administrators identify the importance of the different events.
System Events Warning Relay output is triggered when…
Power Transition (OnOff) IKS-6726 is powered on.
Power Transition (OffOn) IKS-6726 is powered down.
Port Events Warning e-mail is sent when…
Link-ON The port is connected to another device.
Link-OFF The port is disconnected (e.g., the cable is pulled out, or the opposing device
shuts down).
Traffic-Overload The port’s traffic surpasses the Traffic-Threshold for that port (provided this