User`s manual

IKS-6726 Introduction
1-2
Overview
The IKS-6726 is certified for use in maritime applications (DNV/GL), traffic control systems (NEMA TS 2), and
railway applications (EN50121-4). It can be used for Gigabit or Fast Ethernet backbones and supports
redundant ring topologies. It also supports dual power inputs (24/48 VDC or 110/220 VDC/VAC) to increase the
reliability of communication.
The IKS-6726 has a modular design that makes network planning easy and allows greater flexibility. You can
install up to 2 Gigabit Ethernet ports and 24 Fast Ethernet ports.
Package Checklist
The IKS-6726 is shipped with the following items. If any of these items is missing or damaged, please contact
your customer service representative for assistance.
1 Moxa IKS-6726
Hardware installation guide
CD-ROM with user’s manual and SNMP MIB file
Warranty statement
RJ45-to-DB9 console port cable
Protective caps for unused ports
rackmount ears
Software Features
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load) and RSTP/STP (IEEE 802.1w/D)
IGMP snooping, GMRP to filter multicast traffic from industrial Ethernet protocols
IEEE 802.1Q VLAN, Port-based VLAN,GVRP for easier network planning
QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
802.3ad, LACP for bandwidth optimization
IEEE 802.1X and https/SSL to enhance network security
SNMP V1/V2c/V3 for differential network management
RMON for efficient, proactive network monitoring
Supports ABC-01 for system configuration backup
Access restriction by MAC address
Port mirroring for online debugging
Automatic warnings by email, relay output
Automatic recovery of connected device’s IP addresses
Line-swap fast recovery
Configuration through web browser, Telnet/serial console, Windows utility, and ABC-01
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported