User`s manual

IKS-6726 Featured Functions
3-44
VLAN Mode
Setting Description Factory Default
802.1Q VLAN Set VLAN mode to 802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
802.1Q VLAN
Management VLAN ID
Setting Description Factory Default
VLAN ID from 1 to 4094 This assigns the VLAN ID of this IKS-6726. 1
Port Type
Setting Description Factory Default
Access This port type is used to connect single devices without tags.
Trunk Select Trunk port type to connect another 802.1Q VLAN aware
switch or another LAN that combines tagged and/or untagged
devices and/or other switches/hubs.
Access
ATTENTION
For communication redundancy in the VLAN environment, set Redundant Port Coupling Port and
Coupling Control Port as Trunk Port since these ports act as the backbone to transmit all packets of
different VLANs to different IKS-6726 units.
Port PVID
Setting Description Factory Default
VID range from 1 to
4094
This sets the default VLAN ID for untagged devices that connect
to the port.
1
Fixed VLAN List (Tagged)
Setting Description Factory Default
VID range from 1 to
4094
This field will be active only when selecting the Trunk port type.
Set the other VLAN ID for tagged devices that connect to the
Trunk port. Use commas to separate different VIDs.
None
Forbidden VLAN List
Setting Description Factory Default
VID range from 1 to
4094
This field will be active only when selecting the Trunk port type.
Set the VLAN IDs that will not be supported by this trunk port.
Use commas to separate different VIDs.
None
To configure the IKS-6726’s port-based VLAN, use the VLAN settings page to configure the ports.