User`s manual
3
3. Featured Functions
This chapter explains how to access IKS-6726’s various configuration, monitoring, and administration
functions. These functions can be accessed by serial, Telnet, or web console. The serial console can be used if
you do not know IKS-6726’s IP address and requires that you connect the IKS-6726 to a PC COM port. The
Telnet and web consoles can be opened over an Ethernet LAN or the Internet.
The web console is the most user-friendly way to configure IKS-6726. In this chapter, we use the web console
interface to introduce the functions. There are only a few differences between the web console, serial console,
and Telnet console.
The following topics are covered in this chapter:
Configuring Basic Settings
Using Port Trunking
Configuring SNMP
Using Communication Redundancy
Using Traffic Prioritization
Using Virtual LAN
Using Multicast Filtering
Using Bandwidth Management
Configuring Bandwidth Management
Using Port Access Control
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using Monitor
Using the MAC Address Table
Using Event Log
Using Syslog
Using HTTPS/SSL