Datasheet

ManualsBrandsMoxa ManualsAutomationSHDSL Ethernet Extender, RJ45 Ports 2, 100Mbps, Managed

www.moxa.com

IEX-402 Series

Industrial managed VDSL2/SHDSL Ethernet extenders

Features and Benefits

• Automatic CO/CPE negotiation reduces configuration time

• Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring

and Turbo Chain

• LED indicators to simplify troubleshooting

• Easy network management by web browser, Telnet/serial console, Windows

utility, ABC-01, and MXview

Certifications

Introduction

The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender

provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to

15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps

and a long transmission distance of up to 3 km.

The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power

inputs make it ideal for installation in industrial applications.

To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of

each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and

accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel,

improve the user experience for quick troubleshooting.

Additional Features and Benefits

• Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km

transmission distance (performance varies by cable quality)

• Moxa proprietary Turbo Speed connections up to 15.3 Mbps

• Supports Link Fault Pass-Through (LFP) and Line-swap fast

recovery

• Supports SNMP v1/v2c/v3 for different levels of network

management

• Interoperable with Turbo Ring and Turbo Chain network redundancy

• Support Modbus TCP protocol for device management and

monitoring

• Compatible with EtherNet/IP and PROFINET protocols for transparent

transmission

• IPv6 Ready

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 1

Auto negotiation speed

Full/Half duplex mode

Auto MDI/MDI-X connection

Combo Port, RJ-11 (RJ45 connector) or Detachable

2-Contact Terminal Block

Standards IEEE 802.1p for Class of Service

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X)

IEEE 802.3x for flow control

IEX-402-VDSL2 Series: ITU G.993.2

IEX-402-SHDSL Series: ITU-T G.991.2

Summary of content (5 pages)

PAGE 1
IEX-402 Series Industrial managed VDSL2/SHDSL Ethernet extenders Features and Benefits • Automatic CO/CPE negotiation reduces configuration time • Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain • LED indicators to simplify troubleshooting • Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview Certifications Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(
PAGE 2
Ethernet Software Features Management SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP MIB MIB-II Time Management SNTP Switch Properties MAC Table Size 1K Packet Buffer Size 512 kbits LED Interface LED Indicators PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port) Serial Interface Console Port RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1) DIP Switch Configuration Ethernet Interface All models: CO/CPE, SNR/SPEED IEX-402-VDSL2
PAGE 3
Standards and Certifications Safety UL 508 Hazardous Locations IEX-402-VDSL2 Series: ATEX, Class I Division 2 EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF Traffic Control IEX-402-VDSL2 Series: NEMA TS2 Railway EN 50121-4 Shock IEC 60068-2-27 Freefall IEC 6
PAGE 4
Dimensions Ordering Information ITU G.993.2 for very high speed digital subscriber line transceivers ITU-T G.991.2 for single-pair high-speed digital subscriber line (G.SHDSL) transceivers 10/100BaseT(X) Ports RJ45 Connector Combo Port, RJ-11 (RJ45 connector) or detachable 2-contact terminal Operating Temp.
PAGE 5
Wall-Mounting Kits WK-30 Wall-mounting kit, 2 plates, 4 screws, 40 x 30 x 1 mm Rack-Mounting Kits RK-4U 19-inch rack-mounting kit Software MXview-50 Industrial network management software with a license for 50 nodes (by IP address) MXview-100 Industrial network management software with a license for 100 nodes (by IP address) MXview-250 Industrial network management software with a license for 250 nodes (by IP address) MXview-500 Industrial network management software with a license for 500 nodes