Installation guide

7
Mounting Dimensions (unit = mm)
Rear View
Side View
Front View
DlN-Rail Kit
DlN-Rail Kit
DlN-Rail
105.00
9.00
19.80
00.53
30.00
00.531
13.10 25.40
15.10
53.60
00.531
17.5273.9377.6451.32
13 18 13
02
.72
03.84
Wall Mounting Kit
3.5
6
13.9
18.2
6
13.9
10
10
5
7.75
30.50
7.75
08.66
50.75
+
+
+
+
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of the EDS-P308 Series when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate, make sure the stiff metal spring is
situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will snap
into place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the Moxa EtherDevice Switch from the DIN-Rail, simply reverse
Steps 1 and 2 above.