Installation guide

3
Package Checklist for EDS-P308
Series
The Moxa EDS-P308 Series is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.
y Moxa EtherDevice™ Switch EDS-P308
y Hardware Installation Guide
y Moxa Product Warranty Statement
y Protective caps for unused ports
Features of EDS-P308 Series
High Performance Network Switching Technology
y 10/100BaseT(X) (RJ45)
y 100BaseFX (SC type, Multi/Single mode)
y IEEE802.3/802.3u/802.3x 100BaseFX (SC type, multi-mode, and
single-mode)
y Store and Forward switching process type, with 1024 address entries
y 10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing
y Provides up to 15.4 watts per PoE port
y Active circuit protection
y Auto disconnection for over voltage or under voltage
y Power consumption detection and classification
Industrial Grade Reliablity
y Power failure, port break alarm by relay output
y Redundant dual DC power inputs
Rugged Design
y Operating temperature range from 0 to 60°C, or extended operating
temperature from -40 to 75°C for “-T” models
y IP30, rugged high-strength case
y DIN-Rail or panel mounting ability
Specifications of EDS-P308 Series
Technology
Standards IEEE802.3, 802.3u, 802.3x, 802.3af
Forward and Filtering
Rate
148810 pps
Packet Buffer Memory 256 KB
Processing Type Store and Forward, with IEEE802.3x full duplex,
back pressure flow control
Address Table Size 1,000 uni-cast addresses
Latency Less than 5 μs
Interface
RJ45 Ports 10/100BaseT(X) auto negotiation speed, F/H duplex