Installation guide

12
Features of SPL-24
High Performance Network Switching Technology
y IEEE802.3af compliance
y Power/data split from PoE lines using either spare-pairs or data pairs
y Support for up to 12.95W at 24 VDC
y Support for up to 15.4 watts per PoE port
y Short circuit protection
y Auto disconnection for over voltage or under voltage
y Power consumption detection and classification
Rugged Design
y Operating temperature range from 0 to 60°C, or extended operating
temperature from -40 to 75°C for “-T” models
y IP30, plastic case
y DIN-Rail or panel mounting ability
Specifications of SPL-24
Technology
Standards IEEE802.3af
Interface
RJ45 Ports 10/100BaseT(X) for PoE IN, and 10/100BaseT(X)
for DATA OUT
LED Indicators Power
Power
Input voltage 44 to 75 VDC
Output voltage 24 VDC
Output current 0.54 A @ 24V
Output Power 12.95 W (@ 24VDC)
Connection Removable “3-pin” Terminal Block for output
Overload current
Protection
400 mA (@48 VDC input)
Efficiency 85% (at 25°C, full-loaded)
Mechanical
Casing IP30 protection, plastic case
Dimensions 25 × 109 × 88 mm (W × H × D)
Weight 95g
Installation DIN-Rail, Wall Mounting
Environmental
Operating Temperature 0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for -T models
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative
Humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety Pending: UL60950, UL 508, CSA C22.2 No. 60950,
EN60950 (pending)