Installation guide

11
LED Indicators
The front panel of the EDS-P308 Series contains several LED indicators. The
function of each LED is described in the table below.
LED
Color State Description
On
Power is being supplied to power input
PWR1
PWR1 AMBER
Off
Power is not being supplied to power
input PWR1
On
Power is being supplied to power input
PWR2
PWR2 AMBER
Off
Power is not being supplied to power
input PWR2
On
When the corresponding PORT alarm is
enabled, and the port’s link is inactive.
FAULT RED
Off
When the corresponding PORT alarm is
enabled and the port’s link is active, or
when the corresponding PORT alarm is
disabled.
On
TP port’s 10 Mbps link is active
Blinking
Data is being transmitted at 10 Mbps
10M GREEN
Off
TP Port’s 10 Mbps link is inactive
On
TP port’s 100 Mbps link is active
Blinking
Data is being transmitted at 100 Mbps
100M GREEN
Off
100BaseTX Port’s link is inactive
On
FX port’s 100 Mbps link is active.
Blinking
Data is being transmitted at 100 Mbps.
FX GREEN
Off
100BaseFX Port’s link is inactive.
On
Power is being supplied to Powered
Device (PD)
PoE AMBER
Off
Power is not being supplied to
Powered Device (PD)
Package Checklist for SPL-24
The Moxa SPL-24 is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service representative for
assistance.
y Moxa PoE Splitter, SPL-24
y Hardware Installation Guide
y Moxa Product Warranty Statement