User Manual

- 13 -
ST-Port Pinouts
ST-Port to ST-Port Cable Wiring
ATTENTION
This is a Class 1 Laser/LED product.
To avoid causing serious
damage to your eyes, do not stare directly into the Laser Beam.
Redundant Power Inputs
Both power inputs can be connected simultaneously to live DC power
sources. If one power source fails, the other live source acts as a
backup, and automatically supplies all of the EDS’s power needs.
DIP Switch Settings
EDS-205A/208A DIP Switches
The default setting for each DIP Switch is
O
FF. The
following table explains the effect of
setting the DIP Switches to the O
N positions.
DIP Switch
Setting
Description
----
–
Serves no function (reserved for future use).
BSP
ON
Enables broadcast storm protection
OFF
Disables broadcast storm protection
ATTENTION
To actively updated DIP switch settings, power
off and then
power on the EDS.
LED Indicators
The front panel of the Moxa EtherDevice Switch contains several LED
indicators. The function of each LED is described in the table below.
LED
Color
State
Description
P1 AMBER
On
Power is being supplied to power input P1.
Off
Power is not being supplied to power input
P1.
P2 AMBER
On
Power is being supplied to power input P2.
Off
Power is not being supplied to power input
P2.
10M GREEN
On
TP port’s 10 Mbps link is active.
Blinking
Data is being transmitted at 10 Mbps.
Off
TP Port’s 10 Mbps link is inactive
100M
GREEN
On
TP/FX port’s 100 Mbps link is active.