User Manual

- 3 -
Features
High Performance Network Switching Technology
• 10/100BaseT(X) auto-negotiation speed, full/half duplex mode,
auto MDI/MDI-X connection, and 100BaseFX (SC/ST type,
Multi/Single mode).
• IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and
100BaseFX.
• IEEE 802.1p for Quality of Service (QoS) traffic prioritized function.
• Store-and-forward switching process type.
Industrial-grade Reliability
• Power failure, port break alarm by relay output
• Redundant dual DC power inputs
• Broadcast storm protection to prevent network devices from
crashing
Rugged Design
• Operating temperature range from -10 to 60°C, or extended
operating temperature from -40 to 75°C for “-T” models
• IP30, rugged high-strength case
• DIN-rail or panel mounting ability
WARNING
The
power for this product is intended to be supplied by a
Listed Power Supply, with output marked LPS, and rated to
deliver 12 to 48 VDC at a maximum
of 0.62 A.
The DC
jack should be used with an LPS unit that is rated to
deliver 12 to 48 VDC at a minimum of 1.1A. The product should
not be disassembled by operators or service people.