Installation Guide
Table Of Contents
- EDS-2005-EL/ELP Series Quick Installation Guide
- Overview
- Package Checklist
- Features
- Panel Layout of EDS-2005-EL/EDS-2005-ELP
- Mounting Dimensions
- DIN-rail Mounting
- Wall Mounting (optional)
- Wiring Requirements
- Grounding the Moxa EtherDevice Switch
- Wiring the Power Input
- Communication Connections
- DIP Switch Settings
- LED Indicators
- Auto MDI/MDI-X Connection
- Dual Speed Functionality and Switching
- Switching, Filtering, and Forwarding
- Switching and Address Learning
- Auto-negotiation and Speed Sensing
- Specifications
- 3 -
Features
High-performance Network Switching Technology
• 10/100BaseT(X) auto-negotiation speed, full/half-duplex mode,
auto MDI/MDI-X connection
• IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X)
• IEEE 802.1p for Quality of Service (QoS) traffic prioritized function
• Store and Forward switching process type
Industrial-grade Reliability
• Broadcast storm protection to prevent network devices from
crashing
Rugged Design
• Operating temperature range from -10 to 60°C
• IP40, rugged high-strength case
• DIN-rail or panel mounting ability
WARNING
The
power for this product is intended to be supplied by a
Listed Power Supply, with output marked LPS, and rated to
deliver 12 to 48 VDC at a maximum
of 0.11 A.
The DC
jack should be used with an LPS unit that is rated to
deliver 12 to 48 VDC at a minimum of
1.1 A. The product
should not be disassembled by operators or service people.