User`s manual

EDR-G903/G902 Features and Functions
3-55
Priority
Setting Description Factory Default
Priority 0/1/2/3 Select the priority for this policy Priority 0
Source IP
Setting Description Factory Default
All (IP Address) Select the Source IP address for this policy All
Single (IP Address)
Range (IP Address)
Source Port
Setting Description Factory Default
All (Port number) Select the Source port number for this policy All
Single (Port number)
Range (Port number)
Destination IP
Setting Description Factory Default
All (IP Address) Select the Destination IP address for this policy All
Single (IP Address)
Range (IP Address)
Destination Port
Setting Description Factory Default
All (Port number) Select the Destination port number for this policy All
Single (Port number)
Range (Port number)
The following table shows the management of outgoing traffic. The maximum bandwidth from LAN to WAN is
100 Kbytes. 10 Kbyte is reserved for traffic that matches the parameters of Priority 0. 20 Kbytes is reserved for
traffic that matches the parameters of priority 2 and so forth.
Set up the outgoing policies as below: