User`s manual

EDR-G903/G902 Features and Functions
3-54
Max. Bandwidth
Setting Description Factory Default
1 to 1,000,000
KBytes/s
The maximum bandwidth for total incoming or outgoing traffic 100 KBytes/s
Default Priority
Setting Description Factory Default
Priority 0/1/2/3 A packet without matching any incoming/outgoing policy will
adhere to the default priority
Priority 3
Minimum Bandwidth of Priority 0/1/2/3
Setting Description Factory Default
1 to 1,000,000
KBytes/s
The minimum bandwidth for Priority 0/1/2/3 Priority 0: 10 KBytes/s
Priority 1: 20 KBytes/s
Priority 2: 30 KBytes/s
Priority 3: 40 KBytes/s
Maximum Bandwidth of Priority 0/1/2/3
Setting Description Factory Default
1 to 1,000,000
KBytes/s
The maximum bandwidth for Priority 0/1/2/3 Priority 0: 10 KBytes/s
Priority 1: 20 KBytes/s
Priority 2: 30 KBytes/s
Priority 3: 40 KBytes/s
Outgoing/Incoming Policy Setup
After configuring the minimum/maximum
bandwidth for each priority, users can set up
the incoming or outgoing policies for Ethernet
traffic, providing the setup meets all of the
following conditions:
Enable or Disable
Setting Description Factory Default
Enable or Disable Enable or disable this Incoming or Outgoing Policy Disabled
Packet To / From
Setting Description Factory Default
All (WAN1 or WAN2) Select the direction of Ethernet traffic for this policy
To: For outgoing policy
From: For incoming policy
All
WAN1
WAN2
Protocol
Setting Description Factory Default
All (TCP/UDP/ICMP) Select the Protocol for in this Policy All
TCP
UDP
ICMP
Service
Setting Description Factory Default
By IP Select the service type (IP address or MAC address) for this
policy
By IP
By MAC