User`s manual

EDR-G903/G902 Features and Functions
3-38
Modbus TCP/IP (UDP) 502
PROFInet RT Unicast (TCP) 34962
PROFInet RT Unicast (UDP) 34962
PROFInet RT Multicast (TCP) 34963
PROFInet RT Multicast (UDP) 34963
PROFInet Context Manager (TCP) 34964
PROFInet Context Manager (UDP) 34964
IEC 60870-5-104 (TCP) 2404
IEC 60870-5-104 (UDP) 2404
DNP (TCP) 20000
DNP (UDP) 20000
The Quick Automation Profile also includes the commonly used Ethernet protocols listed in the following table:
Ethernet Protocol Port Number
IPSec NAT Traversal (UDP) 4500
IPSec NAT traversal (TCP) 4500
FTP-data (TCP) 20
FTP-data (UDP) 20
FTP-control (TCP) 21
FTP-control (UDP) 21
SSH (TCP) 22
SSH (UDP) 22
Telnet (TCP) 23
Telnet (UDP) 23
HTTP (TCP) 80
HTTP (UDP) 80
IPSec (TCP) 1293
IPSec (UDP) 1293
L2F & L2TP (TCP) 1701
L2F & L2TP (UDP) 1701
PPTP (TCP) 1723
PPTP (UDP) 1723
Radius authentication (TCP) 1812
Radius authentication (UDP) 1812
RADIUS accounting (TCP) 1813
RADIUS accounting (UDP) 1813
PolicyCheck
The EtherDevice Router supports a PolicyCheck function for maintaining the firewall policy list. The
PolicyCheck function detects firewall policies that may be configured incorrectly.
PolicyCheck provides an auto detection function for detecting common configuration errors in the Firewall
policy (e.g., Mask, Include, and Cross conflict). When adding a new firewall policy, the user just needs to
click the PolicyCheck button to check each policy; warning messages will be generated that can be used for
further analysis. If the user decides to ignore a warning message, the EtherDevice Router firewall will run on
the configuration provided by the user.
The three most common types of configuration errors are related to Mask, Include, and Cross Conflict.