User`s manual

EDR-G903/G902 Features and Functions
3-32
Enable/Disable NAT policy
Setting Description Factory Default
Enable or Disable Enable or disable the selected NAT policy None
NAT Mode
Setting Description Factory Default
N-1
1-1
Port Forward
Select the NAT types None
Interface (1-1 NAT type)
Setting Description Factory Default
WAN1
WAN2
Select the Interface for this NAT Policy WAN1
LAN/DMZ IP (1-1 NAT type)
Setting Description Factory Default
IP Address Select the Internal IP address in LAN/DMZ network area None
WAN IP (1-1 NAT type)
Setting Description Factory Default
IP Address Select the external IP address in WAN network area None
NOTE
The EtherDevice Router can obtain
an IP address via DHCP or PPPoE. However, if this dynamic IP address is
the same as the WAN IP for 1-to-1 NAT, then the 1-to-1 NAT function will not work. For this reason, we
recommend disabling the DHCP/PPPoE function when using the 1-to-1 NAT function.