User`s manual

EDR-G903/G902 Features and Functions
3-21
Static DHCP List
Use the Static DHCP list to ensure that devices connected to the EtherDevice Router always use the same IP
address. The static DHCP list matches IP addresses to MAC addresses.
In the above example, a device named “Device-01” was added to the Static DHCP list, with static IP address set
to 192.168.127.101 and MAC address set to 00:09:ad:00:aa:01. When a device with MAC address of
00:09:ad:00:aa:01 is connected to the EtherDevice Router, the EtherDevice Router will offer the IP address
192.168.127.101 to this device.
Enable or Disable
Setting Description Factory Default
Enable or Disable Enable or Disable the selected device in the Static DHCP List Disabled
Name
Setting Description Factory Default
Max. 30 characters The name of the selected device in the Static DHCP List None
Static IP Address
Setting Description Factory Default
IP Address The IP address of the selected device None
MAC Address
Setting Description Factory Default
MAC Address The MAC address of the selected device None
Clickable Buttons
Add: Use the Add button to input a new DHCP list. The Name, Static IP, and MAC address must be different
than for the existing list.
Delete: Use the Delete button to delete the Static DHCP list. Click on a list to select it (the background color
of the device will change to blue) and then click the Delete button.
Modify: To modify the information for a particular list, click on a list to select it (the background color of the
device will change to blue), modify the information as needed using the check boxes and text input boxes near
the top of the browser window, and then click Modify.