User`s manual

EDR-G903/G902 Features and Functions
3-10
System File Update—by Remote TFTP
The EtherDevice Router supports saving your configuration file to a remote TFTP server or local host to allow
other EtherDevice Router routers to use the same configuration at a later time, or saving the Log file for future
reference. Loading pre-saved firmware or a configuration file from the TFTP server or local host is also
supported to make it easier to upgrade or configure the EtherDevice Router.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of TFTP
Server
The IP or name of the
remote TFTP server. Must be configured
before downloading or uploading files.
None
Configuration File Path and Name
Setting Description Factory Default
Max. 40 Characters The path and filename of the EtherDevice Router’s
configuration file in the TFTP server.
None
Firmware File Path and Name
Setting Description Factory Default
Max. 40 Characters The path and filename of the EtherDevice Router’s firmware file None
Log File Path and Name
Setting Description Factory Default
Max. 40 Characters The path and filename of the EtherDevice Router’s log file None
After setting up the desired path and filename, click Activate to save the setting. Next, click Download to
download the file from the remote TFTP server, or click Upload to upload a file to the remote TFTP server.
System File Update—by Local Import/Export
Configuration File
Click Export to export the configuration file of the EtherDevice Router to the local host.