User`s manual

EDR-G903/G902 Features and Functions
3-9
If the user enables the SettingCheck function with the Accessible IP list and the confirmer Timer is set to 15
seconds, then when the user clicks the Activate button on the accessible IP list page, the EtherDevice Router
will execute the configuration change and the web browser will try to jump to the SettingCheck Confirmed page
automatically. Because the new IP list does not include the Remote user’s IP address, the remote user cannot
connect to the SettingCheck Confirmed page. After 15 seconds, the EtherDevice Router will roll back to the
original Accessible IP List setting, allowing the remote user to reconnect to the EtherDevice Router and check
what’s wrong with the previous setting.
If the new configuration does not block the connection from the remote user to the EtherDevice Router, the
user will see the SettingCheck Confirmed page, shown in the following figure. Click Confirm to save the
configuration updates.