User`s manual

EDR-G903/G902 Features and Functions
3-4
Maintainer Contact Info
Setting Description Factory Default
Max. 30 Characters Enter the contact information of the person responsible for
maintaining this EtherDevice Router
None
Web Configuration
Setting Description Factory Default
http or https Users can connect to the EtherDevice Router router via http or
https protocol.
http or https
https only Users can connect to the EtherDevice Router router via https
protocol only.
Accessible IP
The EtherDevice Router uses an IP address-based filtering method to control access to EtherDevice Router
units.
Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent unauthorized
access. Access to the EtherDevice Router is controlled by IP address. If a host’s IP address is in the accessible
IP table, then the host will have access to the EtherDevice Router. You can allow one of the following cases by
setting this parameter:
• Only one host with the specified IP address can access this device.
E.g., enter “192.168.1.1/255.255.255.255” to allow access to just the IP address 192.168.1.1.
• Any host on a specific subnetwork can access this device.
E.g., enter “192.168.1.0/255.255.255.0” to allow access to all IPs on the subnet defined by this IP
address/subnet mask combination.
• Any host can access the EtherDevice Router. (Disable this function by deselecting the Enable the accessible
IP list option.)
• Any LAN can access the EtherDevice Router. (Disable this function by deselecting the LAN option to not
allow any IP at the LAN site to access this device.)
E.g., If the LAN IP Address is set to 192.168.127.254/255.255.255.0, then IP addresses 192.168.127.1 /24
to 192.168.127.253/24 can access the EtherDevice Router.