User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to use a PC to operate a DA-660 computer. For clarity, the PC is
referred to as a development workstation and the DA-660 computer is called a target computer.
In addition, manual steps are described to facilitate operations such as system time adjustment,
troubleshooting network connectivity, etc. Some of these operations can be done via system
commands after gaining access to the computer and others can be done by a Web-based
management system, which is described in a later chapter.
The following topics are covered in this chapter:
 Starting Your DA-660 Computer
 Resetting Your DA-660 Computer
 Operating Your DA-660 Computer Via Serial Console
 Changing the Network Settings
¾ Default IP Address
 Operating Your DA-660 Computer Via Telnet Client
 User/Group Management
 Adjusting System Time and RTC Time
 Starting and Stopping Services
 Troubleshooting Network Connectivity
 Simple Network Management Protocol (SNMP)