User`s manual

CP-134U Series User’s Manual Technical Reference
A-2
PCI
The 32-bit CP-134U Series board complies with PCI Specifications 2.1. The IRQ and I/O address
hardware configuration is automatically assigned by the PCI BIOS. This means that you must first
plug in the board before installing the driver software.
As opposed to ISA slots, different PCI slots in the same PC may have different bus numbers and
device numbers with respect to the PCI specifications. The same PCI board will have different
system configurations if switched to a different PCI slot; this is called slot-sensitive or
slot-dependent. This may also apply to PCI slots in a PC with a different motherboard, which may
use different device number sets. For example, some use 17, 18, 19, and 20 for identifying the
respective PCI slots, but some use 11, 12, 13, and 14.
Due to slot-dependency, it is necessary to re-configure the driver software once the board is
plugged into different PCI slots.
Up to 4 CP-134U Series boards are allowed in one system. When installing more than one board,
please remember the order the boards are installed to distinguish the installed boards from
each other.
Return Procedure
For product repair, exchange, or refund, the customer must:
 Provide evidence of original purchase.
 Obtain a Product Return Agreement (PRA) from the sales representative or dealer.
 Fill out the Problem Report Form (PRF). Include as much detail as possible for a shorter
product repair time.
 Carefully pack the product in an anti-static package, and send it, pre-paid, to the dealer. The
PRA should be visible on the outside of the package, and include a description of the problem,
along with the return address and telephone number of a technical contact.