User`s manual

CP-134U Series User’s Manual Serial Programming Tools
4-2
Utilities
In this section, we give brief descriptions of each utility. For more information about these utilities,
see the on-line help from the software diskette.
Diagnostic (for MOXA boards only)
A convenient diagnostic program, ONLY for MOXA boards and ports, provides internal and
external testing of IRQ, TxD/RxD, UART, CTS/RTS, DTR/DSR, DTR/DCD, etc. It allows the
user to check the function of both software and hardware.
To run the Diagnostic program, click on Start Æ Program Æ PComm Lite Æ Diagnostic. A
typical test report for the CP-168U Series board is shown below.
Monitor (for MOXA boards under Windows NT/2000/XP/2003)
A useful port status monitoring program allows you to monitor data transmission of selected
MOXA COM ports. It monitors data transmission/receiving throughput, and communication line
status, with data updated and displayed on the screen at regular time intervals. Click on a specific
port to see a graph of the current communication parameters and status of that port.
To run the Monitor program, click on Start Æ Program Æ PComm Lite Æ Monitor.