User`s manual

CP-134U Series User’s Manual Software Installation
3-32
Updating the Driver
Take the following steps to update the CP-168U board driver.
1. Open Control Panel, click on the Network icon, and select the Adapters tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapter list.
3. Click on the Remove button in the Network window.
4. Click on the Close button in the Network window.
5. Restart the system.
6. Refer to the instructions given in the “First Time Driver Installation” section to install the
new driver.
Removing the Driver
To remove the CP-168U board driver:
1. Open the Control Panel, click on the Network icon, and select the Adapters tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.
3. Click on the Remove button in the Network window.
4. Click on the Close button to exit the Network window.
5. Restart the system to activate the new configuration.