User`s manual

CP-134U Series User’s Manual Software Installation

3-13

11. Select Specify a location and then click on

Next to continue.

12. Insert the Moxa Driver CD into the CD-ROM

drive, and then specify the location of the file

as Software\Win2K-XP-2003 as shown

below (change the drive letter, if needed).

Click on OK to continue.

13. Click on Next to continue with the

installation.

11. Wait while the wizard installs the software.

12. After all files have been copied to the system,

the Completing the Found New Hardware

Wizard window will open to indicate that it

has finished installing “Port 0.” Click on

Finish to install the board’s second port.

13. Repeat the above procedure (Steps 7 to 12)

for the rest of the board’s ports. The last

window to open completes installation of Port