Universal PCI Smart Serial Board Quick Installation Guide Version 1.1, December 2019 Technical Support Contact Information www.moxa.
Overview Moxa’s Universal PCI (UPCI) multiport serial boards can be installed in PCI or PCI-X slots and support both 3.3V and 5V PCI/PCI-X. Package Checklist UPCI board are shipped with the following items: • • • • 1 Moxa UPCI multiport serial board Low-profile bracket (low-profile models only) Quick installation guide (printed) Warranty card NOTE Notify your sales representative if any of the above items are missing or damaged.
#tar -zxvf driv_linux_smart__build_.tgz 2.2. Install the driver: #cd mxser #./mxinstall 2.3. Verify the driver status Use the Moxa diagnostic utility to verify the driver status: #cd /moxa/mxser/utility/diag #./msdiag 2.4. Test the tty port Use the Moxa terminal utility to test the tty ports: #cd /moxa/mxser/utility/term #.
CP-134U Series/CP-134U-I Series RS-422 or RS-485 mode: Use the jumper to cover the two columns on the left of the jumper pins. RS-232 mode: Use the jumper to cover the two columns on the right of the jumper pins.
CP-102UL Series Female DB25 RS-232 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Signal – DCD1 GND CTS1 RxD1 – – – DTR0 DSR0 RTS0 TxD0 – Pin 14 15 16 17 18 19 20 21 22 23 24 25 – Signal – DTR1 DSR1 RTS1 TxD1 – – DCD0 GND CTS0 RxD0 – – CP-104JU Series RJ45 (RS-232) Pin 1 2 3 4 5 6 7 8 Signal DSR RTS GND TxD RxD DCD CTS CTR CP-104UL Male DB25 (CBL-M44M25x4-50) Pin 2 3 4 5 6 7 8 20 Signal TxD RxD RTS CTS DSR GND DCD DTR -5-
(CBL-M44M9x4-50) (OPT4-M9A) Pin 1 2 3 4 5 6 7 8 Male DB9 Signal DCD RxD TxD DTR GND DSR RTS CTS RJ45 (OPT4-RJ45A) Pin 1 2 3 4 5 6 7 8 8-pin RJ45 Signal DSR RTS GND TxD RxD DCD CTS DTR CP-112UL Series Male DB9 (CBL-M25M9x2-50) Pin RS232 1 2 3 4 5 6 7 8 9 DCD RxD TxD DTR GND DSR RTS CTS – RS-422/ RS-4854W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – – RS-4852W – – Data+(B) Data-(A) GND – – – – CP-114UL Series Male DB9 (CBL-M44M9x4-50) Pin RS232 1 2 3 4 5 6 7 8 9 DCD RxD TxD DTR GND DSR RTS CTS – RS-4
Male DB25 (CBL-M44M25x4-50) Pin RS-232 RS-422/ RS-485-4W 2 TxD RxD+(B) 3 RxD TxD+(B) 4 RTS – 5 CTS – 6 DSR – 7 GND GND 8 DCD TxD-(A) 20 DTR RxD-(A) RS-485-2W Data+(B) – – – – GND – Data-(A) CP-118UI Series/CP-138U-I Series Male DB9 (CBL-M78M9x8-100) Pin RS232 RS-422/ RS-4854W 1 DCD TxD-(A) 2 RxD TxD+(B) 3 TxD RxD+(B) 4 DTR RxD-(A) 5 GND GND 6 DSR – 7 RTS – 8 CTS – 9 – – *CP-118U-I Series only RS-4852W – – Data+(B) Data-(A) GND – – – – Male DB25 (CBL-M78M25x8-100) Pin RS-232 RS-422/ RS-485-4W 2 TxD RxD+
CP-118U Series/CP-138U Series Male DB9 (CBL-M62M9x8-100, OPT8-M9 is for CP-118U and CP-138U) (CBL-M78M9x8-100 is for CP-118U-I and CP-138U-I) Pin RS232 1 2 3 4 5 6 7 8 9 DCD RxD TxD DTR GND DSR RTS CTS – RS-422/ RS-4854W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – – RS-4852W – – Data+(B) Data-(A) GND – – – – Male DB25 (CBL-M62M25x8-100, OPT8B is for CP-118U and CP-138U) (CBL-M78M25x8-100 is for CP-118U-I and CP-138U-I) Pin RS-232 RS-422/ RS-485-4W 2 TxD RxD+(B) 3 RxD TxD+(B) 4 RTS – 5 CTS – 6 DSR – 7 GND
RJ45 (OPT8-RJ45) Pin Signal 1 DSR 2 RTS 3 GND 4 TxD 5 RxD 6 DCD 7 CTS 8 DTR *CP-118U Series only CP-132UL Series/CP-132UL-I Series Male DB9 Connector: Device-side Pin Assignments Pin RS-232 RS-422/ RS-485-4W 1 TxD-(A) TxD-(A) 2 TxD+(B) TxD+(B) 3 RxD+(B) RxD+(B) 4 RxD-(A) RxD-(A) 5 GND RxD-(A) 6 RTS-(A) GND 7 RTS+(B) – 8 CTS+(B) – 9 CTS-(A) – RS-485-2W – – Data+(B) Data-(A) GND – – – – CP-134U Series Male DB9 (CBL-M44M9x4-50) Pin RS-232 RS-422 1 2 3 4 5 6 7 8 9 TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND RTS-(
CP-168U Series RS-232 Cable Wiring for OPT8A/B/C/D/S OPT8A/S (DCE, DB25 Female) Pin 2 3 4 5 6 7 8 20 Signal RxD TxD CTS RTS DTR GND DCD DSR OPT8-RJ45 (8-pin) Pin 1 2 3 4 5 6 7 8 Signal DSR RTS TxD GND RxD DCD CTS DTR OPT8B/C (DCE, DB25 Male) Pin 2 3 4 5 6 7 8 20 Signal TxD RxD RTS CTS DSR GND DCD DTR OPT8-M9, OPT8D (DTE, DB9 Male) Pin 1 2 3 4 5 6 7 8 Signal DCD RxD TxD DTR GND DSR RTS CTS - 10 -
RS-422 Cable Wiring for OPT8F OPT8F/Z (DB25 Female) Pin 2 3 14 16 7 Signal RxD+(B) TxD+(B) RxD-(A) TxD-(A) GND RS-422/485 Cable Wiring for OPT8K Pin 2 3 14 16 7 RS-422/ RS-4854W RxD+(B) TxD+(B) RxD-(A) TxD-(A) GND Pin RS-485-2W 2 14 7 Data+(B) Data-(A) GND POS-104UL Series Male DB9 (CBL-M44M9x4-50) Pin 1 2 3 4 5 6 7 8 9 Signal DCD RxD TxD DTR GND DSR RTS CTS RI/5V/12V - 11 -
