Datasheet

www.moxa.com
1
CP-102E/102EL Series
2-port RS-232 PCI Express boards
Features and Benefits
• PCI Express 1.0 compliant
• 921.6 kbps maximum baudrate for fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Low-profile form factor fits small-sized PCs
• Drivers provided for a broad selection of operating systems, including
Windows, Linux, and UNIX
• Easy maintenance with built-in LEDs and management software
Certifications
Introduction
The CP-102E and low-profile CP-102EL are 2-port PCI Express boards designed for POS and ATM applications. Moxa’s PCI Express boards are a
top choice of industrial automation engineers and system integrators, particularly since the boards support many different operating systems,
including Windows, Linux, and UNIX. The CP-102E/EL’s 2 RS-232 serial ports support a fast 921.6 kbps baudrate and provide full modem control
signals to ensure compatibility with a wide range of serial peripherals. In addition, the boards’ x1 classification allows them to be installed in any
PCI Express slot.
Smaller Form Factor
The CP-102EL is a low-profile board that is compatible with any PCI Express slot. The CP-102EL board only requires a 3.3 VDC power supply,
which means that the board fits any host computer, ranging from shoebox to standard-sized PCs.
Drivers Provided for Windows, Linux, and UNIX
Moxa continues to support a wide variety of operating systems, and there is no exception for the CP-102E/EL boards. Reliable Windows and Linux
drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration applications.
Specifications
Serial Interface
Comm. Controller MU860 (16C550C compatible)
Bus PCI Express 1.0
Connector CP-102E: 2 x DB9 male
CP-102EL: DB25 female
FIFO 128 bytes
Max. No. of Boards per PC 8
No. of Ports 2
Serial Standards RS-232
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Stop Bits 1, 1.5, 2