User`s manual

Software Installation
Intellio C320Turbo/PCI User's Manual 3-33
Board Reset
The board reset utility eliminates the need to shut down the UNIX system for re-
initializing the Intellio C320Turbo/PCI board with new configuration. Press Enter
to start board reset.
However, before the board reset is issued, you must make sure that
1. All enabled ports must be disabled.
2. All processes related to the Intellio C320Turbo/PCI, including getty or tty
monitor, are killed.
Once the board is reset, the following message may show if it is successful.
MOXA Serial I/O Board (Ver x.x)
Downloading
MOXA-C320Turbo/PCI (MemBank=XX000;BusNo=X;DevNo=X) is found.
If one of the following message appears, please see “Troubleshooting” chapter.
WARNING! C320Turbo/PCI (XX000;BusNo=X;DevNo=X) not found!
Or ERROR! C320Turbo/PCI (MemBank=XX000) download failed!
Driver Removal
If you want to remove the Intellio C320Turbo/PCI device driver and return to your
previous system configuration, simply press Enter in this function entry and answer
“Y” to confirm. Then the system will be rebuild. This may take some time. If you
answer “N”, no action will be taken.