User`s manual

Software Installation
Intellio C320Turbo/PCI User's Manual 3-17
Board and Port Ready Stage
Click [OK] for all the dialog boxes to finish the configuration and exit the “MOXA
Ports Installation” dialog box.
In this last stage, you will complete the driver installation.
Windows 95
After the port installation, you can immediately
use the COM ports of the Intellio
C320Turbo/PCI board without restarting the
Windows 95 system.
Windows 98
After the port installation, click on the [Finish]
button. Now you can immediately use those
COM ports of the Intellio C320Turbo/PCI board
without restarting the Windows 98 system.
Once the installation is finished, error conditions of the board, if any, are displayed
on the screen. Otherwise, everything should be fine.
If an error message similar to “C320Turbo/PCI (BusNo=x, DevNo=x) at base
memory [XXX] interrupt failure!” appears, consult the “Troubleshooting” chapter.
Note ! Up to now, the driver installation of Intellio C320Turbo/PCI is
complete and successful, including the board and port
configuration. However, if changes of the board and port
configuration are needed, please refer to the next section,
“Configuring Board and Port”, for more configuration details.
Note ! Once the board and driver are installed and the driver restarts
successfully, you can start to develop applications with the PComm
library (See “Serial Programming Tools” chapter) or the Microsoft
Win32 API. You can also execute any ready-made application, such