User`s manual

3-10 Intellio C320Turbo/PCI User's Manual
Windows 95/98
Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully
integrate the advanced features of Windows 95/98, multi-process and multi-thread,
pure 32-bit Windows 95/98 virtual device port drivers (VxD) compliant with
communication driver (VCOMM) are developed for Intellio C320Turbo/PCI and
other MOXA multiport boards. The drivers conform to Win32 COMM API
standard.
If you install the driver for the first time or you want to install more boards, please
go directly to the section “Installing Driver”.
If you already have installed the driver and want to re-configure the board, please
refer to the section “Configuring Board and Port”.
If you want to update or even remove driver, please go to the section “Updating
Driver” and secton “Removing Driver”.
If you want to remove boards, please simply unplug the undesired boards from the
system.
Installing Driver
If you install for the first time, or you want to install more boards, this section is for
you.
You can easily plug the Intellio C320Turbo/PCI board and work right away with
very little installation efforts under Windows 95/98, which supports Plug and Play
capability. The Windows 95/98 will automatically detect the presence of the newly
plugged board and prompt you to install the software driver the first time. In this
case, you need the driver diskette.
Up to four Intellio C320Turbo/PCI boards can be installed together as long as the
memory addresses and IRQ number resources are sufficient and available in a
system.
The following flow chart illustrates the driver installation stages of the Intellio
C320Turbo/PCI board. Each stage is detailed later.