Installation guide

— 11 —
Green On
WLAN is functioning in
Client/Slave mode.
Green Blink
WLAN’s is transmitting data in
Client/Slave mode.
Amber On
WLAN is functioning in
AP/Bridge/Master mode.
Amber Blink
WLAN’s is transmitting data in
AP/Bridge/Master mode.
WLAN 2
Green/
Amber
Off
WLAN is not in use or not working
properly.
Yellow On LAN port’s 10Mbps link is active.
Yellow Blink Data is being transmitted at 10 Mbps.
Yellow Off LAN port’s 10Mbps link is inactive.
Green On LAN port’s 100Mbps link is active.
Green Blink
Data is being transmitted at 100
Mbps.
LAN 1
Yellow/
Green
Green Off LAN port’s 100Mbps link is inactive.
Yellow On LAN port’s 10Mbps link is active.
Yellow Blink Data is being transmitted at 10 Mbps.
Yellow Off LAN port’s 10Mbps link is inactive.
Green On LAN port’s 100Mbps link is active.
Green Blink
Data is being transmitted at 100
Mbps.
LAN 2
Yellow/
Green
Green Off LAN port’s 100Mbps link is inactive.
Specifications
WLAN
Standards IEEE 802.11a/g/b for Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3u 10/100BaseT(X) for Ethernet LAN
EEE 802.3af for Power-over-Ethernet
IEEE 802.1D/w STP/RSTP
Spread Spectrum and
Modulation (Typical)
DSSS with DBPSK, DQPSK, CCK
OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps,
QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps,
DQPSK @ 2 Mbps, DBSK@ 1 Mbps
Operating Channels
(Central Frequency)
US: 2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU: 2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
Security 64-bit and 128-bit WEP encryption, WPA /WPA2
Personal or Enterprise (IEEE 802.1X/ RADIUS,
TKIP and AES)