Installation guide

— 9 —
ATTENTION
To ensure the IP68-rated connectivity, you must use a waterproof
housing during any communication activities. An IP68-rated field
installable plug, which is attached in AWK-6222’s accessory
pack, may be needed in this case. The installation guide is shown
below:
Waterproof RJ45 Plug (Optional)
Dimensions (unit: mm)
Installation
STEP 1:
Attach the gasket ① to the housing ③
STEP 2:
Insert the cable (ex. CAT5e) through the clamp ring ④, screw nut ②, seal ⑤
and housing ③, as follows: