Installation Guide

- 13 -
ATTENTION
The AWK-3251A-M12-RCC is NOT a portable mobile device and
should be located at least 50 cm away from the human body.
The AWK-3251A-M12-RCC is NOT designed for the general
public. To ensure that your AWK-3251A-M12-RCC wireless
network is safe and configured correctly, consult a well-trained
technician to assist with the installation process.
ATTENTION
Use the
appropriate antennas for your wireless setup: Use 2.4
GHz antennas when the
AWK-3251A-M12-RCC is configured for
IEEE 802.11b/g/n.
Use 5 GHz antennas when the AWK-3251A-
M12
-RCC is configured for IEEE 802.11a/n/ac. Make sure that
the antennas are
located in an area with a lightning and surge
protection system installed.
ATTENTION
Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into
contact with such circuits. When installing the antenna, take
extreme care not to come into contact with such circuits,
because they ma
y cause serious injury or death. For proper
installation and grounding of the antenna, refer to national and
local co
des (for example, U.S.: NFPA 70; National Electrical
Code (NEC) Article 810;
Canada: Canadian Electrical Code,
Section 54).
NOTE
For installation flexibility, you can use either antenna 1 or
antenna 2
. Make sure the antenna connection matches the
antenna
s configured in the AWK-3251A-M12-RCC’s web
interface.
To protect the connectors and RF module, all radio ports should
be terminated by ei
ther an antenna or a terminator. We
strongly recommend using resistive terminators for terminating
the unused antenna ports.
Software Setup
This section covers the software setup for the AWK-3251A-M12-RCC.
How to Access the AWK
Before installing the AWK device (AWK), make sure that all items in the
package checklist are provided in the product box. You will also need
access to a notebook computer or PC equipped with an Ethernet port.