User Manual

- 3 -
Overview
The AWK-3131A 3-in-1 industrial wireless access point meets the growing
need for faster data transmission speeds and wider coverage by
supporting IEEE 802.11n technology with a net data rate of up to 300
Mbps. The AWK-3131A combines two adjacent 20 MHz channels into a
single 40 MHz channel to deliver a potent combination of greater
reliability and more bandwidth. The two redundant DC power inputs
increase the reliability of the power supply, and the AWK-3131A can be
powered via PoE to make deployment easier. The AWK-3131A can
operate on either the 2.4 or the 5 GHz band and is backwards-compatible
with existing 802.11a/b/g deployments.
Hardware Setup
This section covers the hardware setup for the AWK-3131A.
Package Checklist
Moxa’s AWK-3131A is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
• 1 AWK-3131A wireless AP/client
• 2 2.4/5 GHz antennas: ANT-WDB-ARM-0202
• DIN-rail kit
• 2 plastic RJ45 protective caps
• Cable holder with one screw
• Quick installation guide (printed)
• Warranty card