User Manual

- 18 -
• Step 3: Set the RF type and Channel settings for the AWK.
On the Wireless LAN Setup  WLAN  Basic WLAN Setup page,
edit the RF type and Channel settings.
Click Submit to apply the changes, and restart the AWK in client
mode to complete the configuration process.
Point-to-Point Scenario (Master/slave mode)
Configuring the AWK as a Master
• Step 1: Set the operation mode of the AWK to Master mode.
Go to Wireless LAN Setup  Operation Mode, set the operation
mode to Master, and then click Submit to apply the change.
• Step 2: Set up your own SSID.
Go to Wireless LAN Setup  WLAN  Basic WLAN Setup and
click Edit to set the SSID.
• Step 3: On the Wireless LAN Setup  WLAN  Basic WLAN
Setup page edit the RF type and Channel settings.
Click Submit to apply the changes, and restart the AWK in master
mode to complete the configuration process.