User Manual

- 17 -
• Step 3: Set the RF type and Channel for the AWK.
Go to Wireless LAN Setup  WLAN  Basic WLAN Setup.
We recommend that you choose the RF type 5 GHz for a relative clean
medium with minimum interference.
For the Channel setting, we recommend that you choose a channel
other than the default channel to avoid interference.
Click Submit to apply the changes, and restart the AWK in AP mode
to complete the configuration process.
Configuring the AWK as a Client
• Step 1: Set the operation mode of the AWK to Client mode.
Go to Wireless LAN Setup  Operation Mode, set the operation
mode to Client, and then click Submit to apply the change.
• Step 2: Link to an existing SSID.
Go to Wireless LAN Setup  WLAN  Basic WLAN Setup and
click Site Survey to select an existing SSID, or directly enter an
existing SSID in the text field.