User Manual

- 16 -
First-Time Quick Configuration
After successfully accessing the AWK, refer to the appropriate subsection
below to quickly set up a wireless network.
NOTE
Ensure that there are no IP address conflicts when you configure
more than one AWK on the same subnet.
Point-to-Multipoint Scenario (AP/Client Mode)
Configuring the AWK as an AP
• Step 1: Set the operation mode of the AWK to AP mode.
Go to Wireless LAN Setup  Operation Mode and select AP.
NOTE
The default operation mode for the AWK is AP.
• Step 2: Set up your own SSID.
Go to Wireless LAN Setup  WLAN  Basic WLAN Setup and
click Edit to set the SSID.
NOTE
The default SSID is MOXA.