User Manual

- 12 -
LED Indicators
The front panel of the AWK-3131A contains several LED indicators. The
function of each LED is described in the table below:
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR1 Green
On
Power is on (power input 1)
Off
Power is not being supplied.
PWR2 Green
On
Power is on (power input 2)
Off
Power is not being supplied.
PoE Amber
On
Power is being supplied via the PoE.
Off
Power is not being supplied via PoE.
FAULT Red
On
System is booting up, or a system
configuration error or relay event has
occurred.
Blinking
(fast at
0.5-
second
intervals)
Cannot get an IP address from the
DHCP server.
Blinking
(slow at
1-second
intervals)
IP address conflict
Off
Error condition does not exist.
STATE
Green
On
System startup is complete and the
system is in operation.
Blinking
(fast at
0.5-
second
intervals)
AeroLink Protection is enabled and is
currently in “Backup” state.
Blinking
(slow at
1-second
intervals)
Device has been located by Wireless
Search Utility
Red
On
System is booting up
SIGNAL
(5 LEDs)
Green
On
Wi-Fi Signal Level (for client/slave/
client-router modes only)
Off
WLAN
Green
On
WLAN function is in client/slave/
client-router mode and has established
a link with an AP.
Blinking
WLAN data transmission is in
client/slave/client-router mode.
Off
WLAN is not in client/slave/
client-router mode or has not
established a link with an AP.
Amber
On
WLAN is in AP/master mode.
Blinking
WLAN data transmission is in AP/master
mode.
Off
WLAN is not in use or not working
properly