Installation guide

- 5 -
Mounting Dimensions (unit = mm)
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back
panel of the AWK-3121 when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to the AWK-3121, make sure the
stiff metal spring is situated towards the top, as shown in the figures
below.
STEP 1:
Insert the top of the DIN
-Rail into
the
slot just
below the stiff metal spring.
STEP 2:
The DIN
-Rail attachment unit will
snap into place as shown below.
To remove the AWK-3121 from the DIN-Rail, simply reverse Steps 1 and
2.